The following section describes operations you can perform manually when the tape library is not in use.
When the library is inactive, you might have to:
■Open the front door
■Move the robot
■Locate a cartridge in the storage cells
■Remove a cartridge from the hand
■Mount a cartridge in a drive
■Dismount a cartridge from a drive
Before starting any of these tasks, you must take precautions against electrostatic discharge (ESD).
Caution Potential static electricity damage to electrical components: Take precaution against potential ESD damage by touching unpainted metal on the library frame before reaching into the library or touching any drives. Avoid touching any electrical components.
After you have opened a library door:
1.With your finger, touch a gray, unpainted metal surface, such as the library frame just inside the front door.
2.Keep your body movement to a minimum as you touch the drives or library components.
Note | Antistatic wrist straps with |
| available. |
|
|
4 Chapter
Chapter 4 | Manual Operation 121 |