DNS Configuration

 

 

 

 

Note

You must enter the Domain Name Service (DNS) configuration

 

 

only if your Simplified Network Management Protocol (SNMP)

 

 

agent is set to collect ("trap") named recipients. If SNMP is set

 

 

for numbered recipients, no entries are required.

Setting the Domain

 

The first entry you must make for the DNS Configuration is the Domain Name

Name (DMN) Field

(DMN) field.

 

1. Press the arrow button until the cursor underscores DMN.

2. Press the [SELECT] button. An editing screen appears.

3. On the editing screen:

a. Press the up and down arrow buttons to select a value for each letter in the domain server’s name.

b. Press the [SELECT] button to move right to the next field. c. Press the [MENU] button to move left to the previous field.

4. Enter the main server’s name, being sure to append .com at the end.

5. When the screen displays your desired setting, press the [SELECT] button (from the right-most field) to save the changes.

3 Chapter

Setting the DNS Server’s IP Address

Note

You may press the [MENU] button from the left-most field to

 

abort.

 

 

The second entry you must make is the primary DNS server’s IP address.

1.Press the arrow button until the cursor underscores SVR Primary.

2.On the editing screen:

a.Press the up and down arrow buttons to select a value for each number in the primary domain server’s IP address.

b.Press the [SELECT] button to move right to the next field.

c.Press the [MENU] button to move left to the previous field. Press the [SELECT] button. An editing screen appears.

3.When the screen displays your desired setting, press the [SELECT] button (from the right-most field) to save the changes.

Chapter 3

Entering Configuration Data 85