You also can change the operator panel’s screen characteristics from the main Configuration Menu. The screen characteristics are saved in
To change the contrast and backlight (or brightness) of the operator panel screens:
1.At the Main Configuration Menu, press an arrow button until the cursor underscores DISPLAY INFO.
2.Press the [SELECT] button. The Display Info Menu will appear.
3.Press the arrow buttons to line up with the desired screen characteristic: CONTRAST or BACKLIGHT.
An editing screen will appear.
4.Press the up and down arrow buttons to change the count value.
Note | To reset the screen characteristics to the default values, line up |
| the cursor with RESTORE DEFAULTS and press the [SELECT] |
| button. |
|
|
5.Press the [SELECT] button to save the changes. (You may press the [MENU] button to abort.)
6.If you have already changed the library’s SCSI ID and are planning to exit the main Configuration Menu at this time, you must press the [RESET] button. If you try to exit the main configuration menu, a message will appear requesting that you reset the library.
If you have not changed the library’s SCSI ID, you may exit the configuration menu to do other tasks.
3 Chapter
Chapter 3 | Entering Configuration Data 87 |