Source is:
The Source is: setting specifies the paper source to use for printing a document. Different printer models support different paper sources. The list of paper sources depends on the printer model and its accessories. Any optional paper trays that are installed through the Configure tab are also shown here.
The Source is:
•Automatically Select
•Printer Auto Select
•Manual Feed in Tray 1
•Tray 1
•Tray 2
The default setting is Automatically Select. When this setting is selected, the printer uses the paper tray that supports the media size that you have selected. If you select a paper source other than Automatically Select, make sure that the correct paper size is loaded in the paper source.
If a conflict exists among paper source, size, and type, and you choose to keep the conflicting settings, the settings are processed in the following order: paper size, paper type, and then paper source.
For information about media sizes and types, see the “Media attributes” section of this guide.
Type Is
The Type Is
You cannot manually add custom paper types through the driver. Custom sizes can be added only if you use the bidirectional communication mechanism, so the sizes must already exist in the printer when the bidirectional query occurs. If bidirectional communication is enabled, then the information returned is an updated list of paper types. If bidirectional communication is not enabled, then the driver looks for custom paper types saved from a previous bidirectional communication query, and uses those. Otherwise, no custom paper types are available through the driver.
The following standard types appear in the lists:
•Bond
•Cardstock (> 164 g/m2)
•Color
•Glossy (75 - 105 g/m2)
•Envelope
•Heavy (106 - 163 g/m2)
•Heavy Glossy
•Labels
•Letterhead
•Light (< 75 g/m2)
•Plain
•Preprinted
•Prepunched
•Recycled
•Tough Paper
Software Technical Reference ENWW | HP Color LaserJet printing system features | 109 |