Control panel

message

Description

Recommended action

Event Log Empty

Genuine HP supplies installed

GENUINE HP SUPPLIES

DESIGNED FOR <PROD> Incorrect

INCORRECT <COLOR>

CARTRIDGE alternates with For help press ?

SHOW EVENT LOG was selected from the control panel, and the event log is empty.

A new HP cartridge has been installed. The printer returns to the Ready state after approximately 10 seconds.

This genuine HP supply was not designed for this printer and is not supported. Print quality might be affected.

Access to the menu is restricted.

A color cartridge is installed in an incorrect slot or the cartridge is the wrong type, and the cover is closed.

No action necessary.

No action necessary.

Replace this supply with a genuine HP supply designed for this printer.

Contact the network administrator. Press ? for help.

or

See Changing print cartridges for more information.

INCORRECT

SUPPLIES

For status press the Select button on the printer front panel.

Initializing

Initializing permanent storage

INSTALL <COLOR> CARTRIDGE alternates with

For help press ?

INSTALL FUSER For help press ?

INSTALL SUPPLIES

For status press the Select button on the printer front panel.

INSTALL TRANSFER

UNIT alternates with For help press ?

At least one supply item is incorrectly positioned in the printer and another supply item is missing, incorrectly placed, out, or low.

This message is displayed when the printer is turned on, as soon as the individual tasks begin initialization. This message is displayed when the printer is turned on to show that permanent storage is being made ready for use.

The cartridge is either not installed or not correctly installed in the printer.

The fuser is either not installed or not correctly installed in the printer.

At least one supply item is missing or is not correctly seated in the printer and another supply item is missing, incorrectly placed, out, or low. Insert the supply item or make sure the installed supply item is fully seated.

The transfer unit is either not installed or not correctly installed in the printer.

Press the Select button on the printer front panel and then press ? for help.

No action necessary.

No action necessary.

Press ? for help. or

See Changing print cartridges for more information.

Press ? for help. or

See Replacing the fuser and pickup roller for more information.

Press the Select button on the printer front panel and then press ? for help.

Press ? for help. or

See Replacing the transfer kit for more information.

Software Technical Reference ENWW

Technology background information

31

Page 33
Image 33
HP 3500 3500 manual Control panel Message Description Recommended action