Control panel | Description | Recommended action | |
message |
|
| |
Ready | The printer is online and ready for data. No | No action necessary. | |
Diagnostics mode | status or device attendance messages are |
| |
pending at the display. |
| ||
alternates with |
| ||
|
| ||
To exit press |
|
| |
Cancel Job key |
|
| |
Ready | The printer is online and ready for data. No | No action necessary. | |
| status or device attendance messages are |
| |
| pending at the display. |
| |
Receiving | A firmware upgrade is in progress. | Do not turn the printer off until the printer | |
upgrade |
| returns to Ready. | |
RELOAD TRAY X | The transparency currently loaded might | CAUTION | |
TRNSPRNCY | not be supported. | Use only transparencies specified for use | |
<SIZE> |
| with HP Color LaserJetprinters. Non- | |
alternates with |
| compatible transparencies can damage | |
| the printer. See the HP LaserJet Printer | ||
Verify transparency |
| ||
| Family Print Media Specification Guide. | ||
meets specification |
| ||
| 1. Remove all | ||
|
| ||
|
| transparencies from Tray X. | |
|
| 2. Load compatible transparencies in Tray | |
|
| 1. | |
REMOVE ALL | The printer is executing a Component Test. | Remove all print cartridges. | |
| After diagnostics are complete, reinstall all | ||
CARTRIDGES |
| print cartridges. | |
alternates with |
|
| |
To exit press |
|
| |
Cancel Job key |
|
| |
REMOVE AT | The printer is executing a Disable | Remove one print cartridge. | |
LEAST ONE | Cartridge Check or Component Test. | After the test is complete, reinstall the print | |
PRINT CARTRIDGE |
| cartridge. | |
alternates with |
|
| |
To exit press |
|
| |
Cancel Job key |
|
| |
REPLACE | The identified print cartridge has reached | Press ? for help. | |
<COLOR> | the end of life. Printing will not continue |
| |
CARTRIDGE | until the cartridge is replaced. |
| |
|
| ||
alternates with |
|
| |
For help press ? |
|
| |
REPLACE | The identified print cartridge is nearing the | 1. Order the identified print cartridge. | |
<COLOR> | end of its useful life and the SUPPLIES | 2. Press the Select button on the printer | |
| LOW setting in SYSTEM SETUP is set to | ||
CARTRIDGE | front panel.to continue. | ||
STOP. To override, press the Select | |||
alternates with | or | ||
button on the printer front panel.. | |||
To continue press | Press ? for help. | ||
| |||
the Select button on |
|
| |
the printer front |
|
| |
panel. |
|
|
Software Technical Reference ENWW | Technology background information | 35 |