•Univers Condensed Bold Italic

•CG Omega

•Garamond Kursiv

•Univers Condensed Medium

•CG Omega Bold

•Garamond Kursiv Halbfett

•Univers Condensed Medium Italic

•CG Omega Bold Italic

•Letter Gothic

•Univers Medium

•CG Omega Italic

•Letter Gothic Bold

•Univers Medium Italic

•CG Times

•Letter Gothic Italic

•Univers Italic

•CG Times Bold

•CG Times Bold Italic

•Wingdings

•CG Times Bold Italic

Installing the Macintosh printing system

 

 

On a Macintosh-compatible computer, the installation procedures are the same for a network administrator, a network

 

 

client, and a single user. Install the software on any computer that has access rights to the printer.

 

 

 

If the computer is connected to the printer by a LocalTalk (printer port) or EtherTalk connection, you must

Note

 

 

 

 

configure the AppleTalk (or network) control panel for the correct connection to communicate with the printer. You

 

 

 

must set up the HP Color LaserJet 3500 series printers, connect them to the computer, and turn them on before

 

 

 

the software is installed. Macintosh OS systems do not support parallel connections. You can use either a USB

 

 

 

cable or a cross-over Ethernet cable for a direct connection to a computer running the Macintosh OS. In the

 

 

 

following instructions, "XXXX" represents the HP Color LaserJet 3500 printer model number.

 

 

The Macintosh partition contains an installer program for each language. Find the language appropriate for the

 

 

operating system being used, and then use the installer program for that language.

To install the HP LaserJet printer software for the Macintosh OS

1.Insert the CD-ROM that came with the Macintosh printer software into the CD-ROM drive.

Note If the CD screen does not open automatically, double-click the CD-ROMicon on the desktop to open the CD-ROM window.

2.Open the HP LaserJet Installers folder. Find the Installer icon for the appropriate language. Double-click the Installer icon to launch the Installer. In the opening dialog, click Continue.

Note The Continue button appears only after you type the "Admin" password in the Authenticate dialog box (OS X, versions 10.1 and later only).

Software Technical Reference ENWW

Installing the Macintosh printing system

189