HP 3500 3500 manual Order Transfer KIT, Paper Path Test

Control panel

message

Description Recommended action

NON HP SUPPLY DETECTED alternates with For help press ?

NON HP SUPPLY IN USE alternates with Ready

ORDER <COLOR> CARTRIDGE alternates with Ready

ORDER FUSER KIT alternates with Ready

For help press ?

ORDER SUPPLIES alternates with Ready

ORDER TRANSFER KIT

alternates with Ready

For help press ? Paused

alternates with

To return to Ready

press the STOP key Performing...

PAPER PATH TEST

A new supply has been installed that is not made by HP. This message is displayed until an HP supply is installed or the Select button on the printer front panel is pressed.

The printer has detected that a non-HP supply is currently installed and the Select button on the printer front panel (override) was pressed.

The identified print cartridge is nearing the end of its useful life. The printer is ready and will continue for the estimated number of pages indicated.

The fuser is near end of life. The printer is ready and will continue for the estimated number of pages indicated.

More than one supply item is low.

The number of pages remaining for the transfer unit has reached the low threshold, and the SUPPLIES LOW setting in SYSTEM SETUP is set to STOP.

The printer has paused.

The printer is performing a Paper Path Test.

If you believe you purchased an HP supply, please call the HP fraud hotline at 1-877-219-3183.

Service or repairs required as a result of using non-HP supplies is not covered under HP warranty.

To continue printing, press the Select button on the printer front panel. The first pending job will be cancelled.

If you believe you purchased an HP supply, please call the HP fraud hotline at 1-877-219-3183.

Service or repairs required as a result of using non-HP supplies is not covered under HP warranty.

Order the identified print cartridge. Printing will continue until REPLACE <COLOR> CARTRIDGE is shown.

Note	Estimated pages remaining is
	based upon historical page
	coverage with this supply of
	one percent.

Order the fuser kit. Printing can continue until REPLACE FUSER KIT is shown.

or

Press ? for help.

1.Press the Select button on the printer front panel to identify which supplies should be ordered.

2.Order the identified supplies. Printing can continue until REPLACE SUPPLIES is reached.

or

Press ? for help.

Order the transfer kit. Printing can continue until REPLACE TRANSFER KIT is reached.

Press ? for help.

Press the STOP key to resume printing.

No action necessary.

Performing

upgrade please wait

A firmware upgrade is in process.	No action necessary. Do not turn off the
	printer.
The printer is in the process of clearing	No action necessary.
data.

Software Technical Reference ENWW Technology background information 33