The following series of messages appears in the command window:
200 PORT command successful
150 Opening BINARY mode data connection
226 Ready
226 Processing Job
226 Transfer complete
Then, a message containing transfer speed information appears.
10.The download process begins and the firmware is updated on the printer. This can take about five minutes. Let the process finish without further interaction with the printer or computer.
Note | The printer automatically turns off and then on again after processing the upgrade. |
11.At the command prompt, type: bye
to exit the ftp command.
12.At the command prompt, type: exit
to return to the Windows (R) interface.
Mac operating systems
1.Take note of the TCP/IP address on the EIO Jetdirect page. The Jetdirect page is the second page of the configuration page printout. To print a configuration page, see the "Determining the current level of firmware" section of this guide.
2.Open a Terminal window on your Macintosh. You can find the Terminal application on the computer hard drive under the Applications/Utilities folder.
3.Type:
FTP <TCP/IP PRINTER ADDRESS>
For example, if the TCP/IP address is 192.168.0.90, type: FTP 192.168.0.90.
4.Press Enter on the keyboard.
5.When prompted for a user name and password, press Enter.
6.Type:
put <path>
where <path> is the location where the .RFU file was downloaded from the Web, including the path. For example, type:
put C:\LJ\3500FW.RFU and then press Enter.
Note | If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, |
| type: |
| put "c:\My Documents\LJFW.RFU" |
Software Technical Reference ENWW | Technology background information | 61 |