Control panel message

Description

 

Recommended action

 

 

 

 

 

RELOAD TRAY X

The transparency currently loaded might

 

 

 

 

CAUTION

TRNSPRNCY <SIZE>

not be supported.

 

Use only transparencies specified for use

 

 

alternates with

 

 

with HP Color LaserJetprinters. Non-

Verify transparency

 

 

compatible transparencies can damage

 

 

the printer. See the HP LaserJet Printer

meets specification

 

 

Family Print Media Specification Guide.

 

 

1.

Remove all non-compatible

 

 

 

 

 

 

 

transparencies from Tray X.

 

 

2.

Load compatible transparencies in

 

 

 

 

 

Tray 1.

 

 

 

See Printing on special media for more

 

 

 

information.

 

 

 

 

 

REMOVE ALL

The printer is executing a Component

 

Remove all print cartridges.

PRINT CARTRIDGES

Test.

 

After diagnostics are complete, reinstall

 

 

alternates with

 

 

all print cartridges.

 

 

 

 

 

 

 

To exit press

 

 

 

 

 

 

 

Cancel Job key

 

 

 

 

 

 

 

 

 

 

 

REMOVE AT LEAST ONE

The printer is executing a Disable

 

Remove one print cartridge.

PRINT CARTRIDGE

Cartridge Check or Component Test.

 

After the test is complete, reinstall the

 

 

alternates with

 

 

print cartridge.

 

 

 

 

 

 

 

To exit press

 

 

 

 

 

 

 

Cancel Job key

 

 

 

 

 

 

 

 

 

 

 

 

REPLACE <COLOR>

The identified print cartridge has reached

 

Press

for help.

CARTRIDGE

the end of life. Printing will not continue

 

or

 

 

 

until the cartridge is replaced.

 

 

 

 

alternates with

 

 

 

 

 

 

 

 

See Changing print cartridges or

For help press ?

 

 

Replacing supplies and parts for more

 

 

information.

 

 

 

 

 

 

See Supplies and accessories for more

 

 

 

information.

 

 

 

 

 

REPLACE <COLOR>

The identified print cartridge is nearing

1.

 

Order the identified print cartridge.

CARTRIDGE

the end of its useful life and the

2.

 

Press to continue.

SUPPLIES LOW setting in SYSTEM

 

 

 

 

 

 

 

 

alternates with

SETUP is set to STOP. To override,

 

or

 

 

 

To continue press .

press .

 

Press

for help.

 

 

 

 

 

See Supplies and accessories for more

 

 

 

information.

 

 

 

 

 

REPLACE FUSER KIT

The fuser kit is at end of life.

 

Press

for help.

For help press ?

 

 

or

 

 

 

 

 

 

See Replacing the fuser and pickup roller

 

 

 

for more information.

 

 

 

See Supplies and accessories for more

 

 

 

information.

 

 

 

 

 

 

 

 

140 Chapter 8 Problemsolving

ENWW