Note
Note
Disabling network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the following benefits:
●decreases
●prevents unauthorized users from printing to the printer
●provides only pertinent information on the configuration page
●allows the printer control panel to display
TCP/IP configuration should not be disabled on the HP Color LaserJet 3500 printer. If you disable TCP/IP, you will lose the connection to the printer's embedded Web server page.
To disable IPX/SPX
Do not disable this protocol if Windows 95/98, Windows NT, Me, 2000, and XP systems will be printing to the printer using IPX/SPX.
1.Press MENU to enter the MENUS.
2.Press 
to highlight CONFIGURE DEVICE.
3.Press 
to select CONFIGURE DEVICE.
4.Press 
to highlight I/O.
5.Press 
to select I/O.
6.Press 
to highlight EIO 1.
7.Press 
to select EIO 1.
8.Press 
to highlight IPX/SPX.
9.Press 
to select IPX/SPX.
10.Press 
to select ENABLE.
11.Press 
to highlight OFF.
12.Press 
to select OFF. The control panel displays a message that the setting has been saved and displays an option to
13.Press MENU to return to the Ready state.
To disable AppleTalk
1.Press MENU to enter the MENUS.
2.Press 
to highlight CONFIGURE DEVICE.
3.Press 
to select CONFIGURE DEVICE.
4.Press 
to highlight I/O.
5.Press 
to select I/O.
6.Press 
to highlight EIO 1.
7.Press 
to select EIO 1.
8.Press 
to highlight APPLETALK.
9.Press 
to select APPLETALK.
ENWW | Network configuration 57 |