3.Press to highlight I/O, and then press
.
4.Press to highlight EMBEDDED JETDIRECT, and then press
.
5.Press to highlight TCP/IP, and then press
.
6.Press to select CONFIG METHOD.
7.Press to highlight MANUAL, and then press
.
8.Press to highlight MANUAL SETTINGS, and then press
.
9.Press to highlight SUBNET MASK, and then press
.
10Press the or
arrow to increase or decrease the number for the first byte of the subnet mask.
.
11Press to move to the next set of numbers. (Press
to move to the previous set of numbers.)
.
12Repeat steps 10 and 11 until the correct subnet mask is entered, and then press to save the
. subnet mask.
13Press Menu to return to the Ready state.
.
Setting the default gateway
1.Press Menu.
2.Press to highlight CONFIGURE DEVICE, and then press
.
3.Press to highlight I/O, and then press
.
4.Press to highlight EMBEDDED JETDIRECT, and then press
.
5.Press to highlight TCP/IP, and then press
.
6.Press to select CONFIG METHOD.
7.Press to highlight MANUAL, and then press
.
8.Press to highlight MANUAL SETTINGS, and then press
.
9.Press to highlight DEFAULT GATEWAY, and then press
.
10Press the or
arrow to increase or decrease the number for the first byte of the default
. gateway.
11Press to move to the next set of numbers. (Press
to move to the previous set of numbers.)
.
12Repeat steps 10 and 11 until the correct default gateway is entered, and then press to save the
. default gateway.
13Press Menu to return to the Ready state.
.
46 Chapter 3 I/O configuration | ENWW |