HP LaserJet 4000N, 4000TN EIO Menu (4000 N/4000 TN), 1, 1, 1, 1, 1, ;'5, ;'5, ;'5, ;'5, #761, '0A++, #..￿46, '0A￿￿￿￿, '0A￿￿￿￿, '0A50#2, 64A￿￿￿￿, 64A50#2, '6#.-￿10, 5+0).'￿4, 018'..￿10

EIO Menu (4000 N/4000 TN)

EIO (enhanced input/output) Menus depend on the particular accessory product installed in an EIO slot of the printer. If the printer contains an HP JetDirect print server EIO card, you can configure basic networking parameters using the EIO Menu. These and other parameters can also be configured through HP JetAdmin.

EIO Menu

Item	Values	Explanation
%()￿0'6914-￿01	01	01: The JetDirect Menu is not accessible.
	;'5	;'5: The JetDirect Menu appears.
018'..￿10	10	Select whether the IPX/SPX protocol stack (in
	1((	Novell NetWare networks, for example) is
		enabled (on) or disabled (off).
&.%￿..%￿10	10	Select whether the DLC/LLC protocol stack is
	1((	enabled (on) or disabled (off).
6%2￿+2￿10	10	Select whether the TCP/IP protocol stack is
	1((	enabled (on) or disabled (off).
'6#.-￿10	10	Select whether the Apple EtherTalk protocol
	1((	stack is enabled (on) or disabled (off).
%()￿018'..￿01	01	01: The IPX/SPX Menu is not accessible.
	;'5	;'5: The IPX/SPX Menu appears. In the
		IPX/SPX Menu, you can specify the frame type
		parameter used on your network. The default

is #761, to automatically set and limit the frame type to the one detected.

For Ethernet cards, frame type selections include '0A￿￿￿￿, '0A++, '0A￿￿￿￿, '0A50#2.

For Token Ring cards, frame type selections include 64A￿￿￿￿, 64A50#2.

In the IPX/SPX Menu for Token Ring cards, you can also specify NetWare Source Routing parameters, which include 54%￿46￿#761 (default), 1((, 5+0).'￿4, or #..￿46.

EN

Control Panel Menus B-19