HP 4000TN, 4000N manual Software for Windows, Access the Windows Printer Driver, Started guide

Software for Windows

Use the Typical Install or Custom Install option to install the HP software. (This includes several printer drivers. For more information, see page 13.)

Note	Network Administrators: If the printer is attached to a network,
	before you can print, the printer must be configured for that network
	using HP JetAdmin or similar network software. (See the getting
	started guide.)

Access the Windows Printer Driver

To configure the driver, access it in one of the following ways:

	Temporarily Change Settings	Change Default Settings
Operating System	(from a software application)	(across all applications)
Windows 95 and	From the File menu, click Print,	Click the Start button, point to
Windows NT 4.0	and then click Properties. (The	Settings, and then click Printers.
	actual steps can vary; this is the	Right-click the printer icon, and
	most common method.)	choose Properties.
Windows 3.1x and	From the File menu, click Print,	From the Windows control panel,
Windows NT 3.51	click Printers, and then click	double-click Printers, highlight
	Options. (The actual steps can	the printer, and click Setup.
	vary; this is the most common
	method.)

Note	Settings in the printer driver and software application override
	control panel settings. (Software application settings override
	printer driver settings.)

EN

Chapter 1: Printer Basics 15