HP 4000TN, 4000N manual Loading the Optional 500-Sheet Tray, On the next

Loading the Optional 500-Sheet Tray

The optional 500-sheet tray is Tray 3 for the HP LaserJet 4000/4000 N printers, or Tray 4 for the HP LaserJet 4000 T/ 4000 TN printers. This tray is adjusted differently than Tray 2 (page 27). Tray 2 and the optional 500-sheet tray can be interchanged in the printer. For supported sizes of paper, see

page A-4.

Note

To avoid paper jams, do not load trays while the printer is printing.

1 Pull the tray completely out of the printer.

2 If the tray is not already set to the desired paper size, squeeze the release on the left guide and adjust the left and right guides to match the width of the paper.

3 Squeeze the release on the back of the rear paper guide and slide it to the desired paper size.

4 Load the tray. For correct orientation, see page 36.

5 Make sure the paper is flat in the tray at all four corners and below the tabs on the guides. The guides should touch the paper without bending it.

Continued on the next page.

EN

Chapter 2: Printing Tasks 29