Printer Messages (Continued)

Message

Explanation or Recommended Action

 

 

4#/￿&+5-￿(+.'￿ 5;56'/￿+5￿(7..

Delete files and then try again, or turn the printer off, and then turn the printer on to delete all files on the device. (Delete files using HP JetAdmin, HP FontSmart, or another software utility. See the software help for more information.)

If the message persists, increase the size of the RAM disk. Change the RAM disk size from the Configuration Menu in the printer’s control panel.

4#/￿&+5-￿+5￿

The RAM disk is protected, and no new files can be written to it.

94+6'￿2416'%6'&

Disable the write protection through HP JetAdmin.

 

 

64#;￿Z￿'/26;

Load the empty tray (Z) to clear the message.

 

If you do not load the specified tray, the printer will continue printing

 

from the next available tray, and the message will continue to display.

64#;￿Z￿.1#&￿ =6;2'?￿￿=5+<'?

Load the requested paper into the specified tray (Z).

Ensure that the trays are correctly adjusted for size. The tray type settings (and size for Tray 1) must be set from the printer’s control panel.

If you are trying to print from the optional 500-sheet tray, be sure to set the paper size dial.

If you are trying to print A4 or letter size paper, and this message appears, make sure the default paper size is set correctly from the Printing Menu in the printer’s control panel.

Press [Go] to print from the next available tray.

Press [-Value+]to scroll through the available types and sizes. Press [Select] to accept the alternate type or size.

705722146'&￿5+<'￿ An external paper handling device detected an unsupported paper

+0￿64#;￿=;;?

size. The printer will go offline until the condition is corrected.

75'￿=6;2'? =5+<'?￿+056'#&!

If the requested paper size or type is not available, the printer asks if it should use another paper size or type instead.

Press [-Value+]to scroll through the available types and sizes. Press [Select] to accept the alternate type or size.

9#+6￿(14￿24+06'4￿ The RAM disk setting has been changed from the printer’s control 61￿4'+0+6+#.+<' panel. This change will not take effect until the printer reinitializes.

76 Chapter 4: Problem Solving

EN