Printer Messages (Continued)

Message

Explanation or Recommended Action

 

 

/'/14;￿5'66+0)5￿ %*#0)'&

The printer changed its memory settings because it did not have enough memory to use the previous settings for I/O Buffering and Resource Saving. This usually occurs after removing memory from the printer, adding a duplexer, or adding a printer language.

You might want to change memory settings for I/O Buffering and Resource Saving (although default settings are usually best) or add more memory to the printer.

/'/14;￿5*146#)'￿ ,1$￿%.'#4'&

The printer did not have enough free memory to print the entire job. The remainder of the job will not print and will be cleared from memory.

Press [Go] to continue.

Change the Resource Saving setting from the printer’s control panel or add more memory to the printer.

/'/14;￿5*146#)'￿ 2#)'￿5+/2.+(+'&

The printer had to compress the job in order to fit it in available memory. Some data loss might have occurred.

Press [Go] to continue.

You might want to add more memory to the printer.

1((.+0'

Press [Go] to place the printer online.

2'4(14/￿24+06'4￿ /#+06'0#0%'

To ensure optimum print quality, the printer prompts you to have routine maintenance performed every 150,000 pages. Contact an HP-authorized service or support provider to perform routine printer maintenance. (See the HP Support pages at the front of this user’s guide.)

4#/￿&+5-￿&'8+%'

The RAM disk had a critical failure and can no longer be used.

(#+.74'

Turn the printer off, and then turn the printer on to clear the message.

 

 

4#/￿&+5-￿(+.'￿

The requested operation could not be performed. You might have

12'4#6+10￿(#+.'&

attempted an illegal operation, such as trying to download a file to a

 

non-existent directory.

EN

Chapter 4: Problem Solving 75