Printer Messages (Continued)

Message

Explanation or Recommended Action

 

 

9410)￿'08'.12'￿

The envelope feeder you are trying to install will not work for this

(''&'4￿+056#..'&

printer.

￿￿￿Z￿2#2'4￿,#/￿ =.1%#6+10?

Remove jammed paper from the specified location. Open and close the top cover to clear the message.

If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. (See the HP Support pages at the front of this user’s guide.)

￿￿￿+057((+%+'06￿ /'/14;

alternates with

24'55￿)1￿61 %106+07'

The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.

Press [Go] to print the transferred data (some data might be lost), then simplify the print job or install additional memory.

￿￿￿2#)'￿611￿ %1/2.':

alternates with

24'55￿)1￿61 %106+07'

The data (dense text, rules, raster or vector graphics) sent to the printer was too complex.

Press [Go] to print the transferred data. (Some data might be lost.)

To print the job without losing data, from the Configuration Menu in the printer control panel, set 2#)'￿2416'%6￿10, print the job, and then return 2#)'￿2416'%6￿#761. Do not leave 2#)'￿ 2416'%6￿10; it might degrade performance.

If this message appears often, simplify the print job.

￿￿￿'+1￿Z￿$7(('4￿18'4(.19

alternates with

24'55￿)1￿61 %106+07'

Too much data was sent to the EIO card in the specified slot (Z). An improper communications protocol may be in use.

Press [Go] to clear the message. (Data will be lost.)

Check the host configuration. If this message persists, contact an HP-authorized service or support provider. (See the HP Support pages at the front of this user’s guide.)

EN

Chapter 4: Problem Solving 77