Loading Envelopes in the Envelope Feeder

Note

Print only on envelopes approved for use in the printer (page 37 and page A-9).

1 Fold down the tray extension. Lift the envelope weight.

2 Squeeze the release lever on the left envelope guide and slide the guides apart.

3 Load envelopes into the envelope feeder with the side-to-be-printed facing up, and the postage end toward the printer. Push the envelopes into the envelope feeder as far as they will go without forcing them. Push the bottom envelope in slightly farther than the top envelopes. (Stack them as shown.)

4 Lower the envelope weight onto the envelopes.

5 Adjust the guides to touch the envelopes without bending them. Make sure the envelope feeder is not overfilled.

Note

Select the envelope size from the software application (if the setting is available), the printer driver, and the Paper Handling Menu in the printer’s control panel (page B-3). To print by type and size of paper, see page 52.

EN

Chapter 2: Printing Tasks 41