Storing, Logging and Printing
Changing Internal Printer Paper
Changing Internal Printer Paper
Description | The printer accepts rolls of thermal paper with the following dimensions: | |
| Width: | 216 mm (8.5 in) or 210 mm (8.27 in) (A4) |
|
| tolerance +2.0 mm - 1.0 mm |
| Maximum Outside Diameter: | 40 mm |
| Inside Core Diameter: | Between 12.5 mm and 13.2 mm |
| Suitable rolls of paper are available from Hewlett Packard, Part Number | |
|
| |
| The paper | |
WARNING | ||
| printer cover is raised. Note the ! CAUTION SHARP EDGE label | |
| on the cover. |
|
|
| |
HOW TO: | 1 Raise the two locking tabs on the sides of the printer cover and then | |
| raise the cover. |
|
2 Raise the printer mechanism front cover. This releases the paper drive. Remove any remaining paper from the front (in the normal direction of operation).
3Lift out the spindle. Adjust the paper width adaptor to the width of the paper being used.
122
