HP Omni BER 718 37718A Using Overhead BER Test Function, Using Overhead BER Test Function

Making Measurements

Using Overhead BER Test Function

	Using Overhead BER Test Function
Description	You can perform a Bit Error Rate test on chosen bytes of the section, line
	and path overhead bytes.
	You can access the transmit Overhead BER on the TRANSMIT
		SONET
	TEST FUNCTION display.

HOW TO:	1	Set up the SONET transmit interface and payload required. See
		"Setting SONET Transmit Interface " page 4.
	2	Set up the receive SONET interface and payload as required. See
		"Setting SONET Receive Interface " page 17.
	3	Choose the overhead byte to be tested on the RECEIVE
				SONET
		TEST FUNCTION	display.
	4	Choose the overhead byte to be tested on the TRANSMIT
					SONET
		TEST FUNCTION	display.
	5	Press RUN/STOP	to start the test.
	6	The PRBS pattern can be errored by pressing SINGLE .

68