Selecting Test Features
Using FEAC Codes
3Choose the FEAC CODE TYPE.
4Choose the MESSAGE from the choices displayed.
If you chose a DS1 message an additional field to the right of the DS1 MESSAGE is displayed. Position the cursor on this field and choose
ALL or SINGLE CHANNEL .
If you choose SINGLE CHANNEL use the EDIT keys to select a channel from 1 to 28. Press END EDIT when finished.
5 | If LOOPBACK is chosen, choose the REPEAT (TIMES) LOOP and |
| MESS, in the range 1 to 15. |
6 | If ALARM/ STATUS is chosen, choose the BURST LENGTH (TIMES). |
7 | Choose TRANSMIT NEW CODE BURST or ON to transmit the |
| selected FEAC message. |
TIP:To View FEAC Messages
The received FEAC message can be viewed on the RESULTS display.
52
