Setting the Interfaces
Setting Wander Transmit Interface
6Choose the WANDER MASK setting required.
You can choose the wander modulating frequency and wander amplitude if OFF is chosen.
If you choose SPOT , you can choose the "spot" wander frequency. The wander amplitude is adjusted and controlled according to your wander frequency choice.
SONET Wander (STS-3, OC-3, OC-12, OC-48)
7 | Set up the SONET transmit interface. See “Setting SONET Transmit | |
| Interface” page 4. | |
8 | Choose JITTER/WANDER WANDER . | |
| If you wish to add jitter to the SONET signal, see "Setting Jitter | |
| Transmit Interface " page 7. | |
9 | Choose WANDER ON . | |
10 | Choose the WANDER MASK setting required. | |
| You can choose the wander modulating frequency and wander | |
| amplitude if | OFF is chosen. |
| If you choose | SPOT , you can choose the "spot" wander frequency. The |
| wander amplitude is adjusted and controlled according to your wander | |
| frequency choice. | |
10
