RECEIVE SONET JITTER
Setting the Interfaces
Setting Extended Jitter Receive Interface
Setting Extended Jitter Receive
Interface
Description: Extended Jitter measurements are made in a jitter bandwidth of 0.1 Hz to 25 kHz. These measurements are made at the upper end of the standard wander frequency range and the lower end of the standard jitter frequency range. The extended jitter receive interface is selected
with RECEIVE PDH/DSn 
JITTER or 
MEASUREMENT TYPE EXTENDED .
The choices made on the jitter receive interface determine the threshold level for determining a jitter hit. The measurement Range and the Filters are not selectable.
HOW TO: 1 Choose MEASUREMENT TYPE
EXTENDED
.
2Choose the HIT THRESHOLD level - if the received jitter exceeds the value chosen a jitter hit is recorded.
19
