Change copy speed or quality
The HP
•Best produces high quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies slower than the Normal or Fast quality settings.
•Normal delivers high quality and is the recommended setting for most of your copying. Normal copies faster than Best and is the default setting.
•Fast copies faster than the Normal setting. The text is comparable to the quality of the Normal setting, but the graphics might be lower quality. The Fast setting uses less ink and extends the life of your ink cartridges.
To change the copy quality from the control panel
1.Press OK when Copy is highlighted on the Home Screen.
2.Press the Menu button to select Copy Settings.
3.Press the down arrow button to highlight Quality, and then press OK.
4.Press the up arrow or down arrow button to select a copy quality, and then press OK.
Adjust the lightness and darkness of your copy
You can use the Lighter/Darker option to adjust the contrast of the copies you make.
To adjust the copy contrast from the control panel
1.Press OK when Copy is highlighted on the Home Screen.
2.Press the Menu button to select Copy Settings.
3.Press the down arrow button to highlight Lighter/Darker, and then press OK.
4.Do one of the following:
•Press the right arrow button to darken the copy.
•Press the left arrow button to lighten the copy.
5.Press OK.
Copy
Change default copy settings
When you change copy settings from the control panel, the settings apply only to the current copy job. To apply copy settings to all future copy jobs, you can save the settings as defaults.
Change default copy settings | 111 |