displays the optimized dots per inch (dpi) that the HP All-in-One printer will print. Printing in maximum dpi is supported on the following paper-types only:

•HP Premium Plus Photo Paper

•HP Premium Photo Paper

•HP Advanced Photo Paper

•Photo Hagaki cards

Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space.

To print in Maximum dpi mode

1.Make sure you have paper loaded in the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the product is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.

5.Click the Advanced tab.

6.In the Features area, select the Enable maximum dpi setting check box.

7.Click the Features tab.

8.In the Paper Type drop-down list, click More, and then select the appropriate paper type.

9.In the Print Quality drop-down list, click Maximum dpi.

NOTE: To find out what dpi the product will print based on the paper type and print quality settings you selected, click Resolution.

10.Select any other print settings that you want, and then click OK.

Print on both sides of the page

You can print two-sided pages with the HP All-in-One manually. When printing two-sided pages, make sure to use paper that is thick enough so that images do not show through to the other side.

To print on both sides of the page

1.Load paper into the input tray.

2.On the File menu in your software application, click Print.

3.Make sure the product is the selected printer.

4.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.

5.Click the Features tab.

6.In the Paper saving options area, select Manual from the Two-sided printing drop- down list.

Print

Perform special print jobs

83