Out of paper

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Replace the rear door

Solution 2: Make sure the paper is loaded correctly

Solution 3: Check the print settings

Solution 4: Clean the paper feed rollers with the HP Paper Feed Cleaning Kit

Solution 5: Clean the rollers

Solution 6: Contact HP support for service

Solution 1: Replace the rear door

Solution: If you removed the rear door to clear a paper jam, replace it. Gently push the door forward until it snaps into place.

Cause: The rear door was removed from the product.

If this did not solve the issue, try the next solution.

Solution 2: Make sure the paper is loaded correctly

Solution: Make sure that the paper is loaded correctly in the input tray. For more information, see:

Load paper” on page 63

Cause: The paper was not loaded correctly.

If this did not solve the issue, try the next solution.

Solution 3: Check the print settings

Solution: Check the print settings.

Check the paper type setting to make sure it matches the type of paper loaded in the input tray.

Check the print quality setting and make sure it is not set too low.

Print the image with a high print quality setting, such as Best or Maximum dpi.

Troubleshooting

Errors 251