the Maintain
All HP in-
One-
Chapter 12
To clean the glass
1.Turn off the product, unplug the power cord, and raise the lid.
2.Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the product.
3.Dry the glass with a dry, soft,
4.Turn on the product.
Clean the lid backing
Minor debris can accumulate on the white document backing located underneath the lid of the HP
To clean the lid backing
1.Turn off the product, unplug the power cord, and raise the lid.
2.Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water.
Wash the backing gently to loosen debris. Do not scrub the backing.
3.Dry the backing with a dry, soft,
CAUTION: Do not use
4.If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol.
CAUTION: Be careful not to spill alcohol on the glass or exterior of the product, as this might damage it.
5.Plug in the power cord, and then turn on the product.
134 Maintain the HP