•Iron-On Transfers.

•Greeting card paper.

Load paper

This section describes the procedure for loading different types and sizes of paper into the HP All-in-One for your copies or printouts.

TIP: To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a resealable bag. If the paper is not stored properly, extreme changes in temperature and humidity might result in curled paper that does not work well in the HP All-in-One.

This section contains the following topics:

•Load full-size paper or small-size photo paper

•Load postcards, Hagaki, or index cards

•Load envelopes

•Load other types of paper

Load full-size paper or small-size photo paper

You can load many types and sizes of paper into the input trays of the HP All-in-One.

TIP: Tap a stack of paper on a flat surface to align the edges. Make sure all the paper in the stack is the same size and type and free of rips, dust, wrinkles, and curled or bent edges.

To load full-size paper

1.Raise and hold the output tray in the open position.

2.Slide the paper-width guide to its outermost position.

Load originals and load paper

Load paper

63