Chapter 7
To reverse an image for
1.On the File menu in your software application, click Print.
2.Make sure the product is the selected printer.
3.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.
4.Click the Features tab.
5.In the Paper Type
6.If the selected size is not what you want, click an appropriate size in the Size list.
7.Click the Advanced tab.
8.In the Features area, select the Mirror Image check box.
9.Click OK, and then click Print or OK in the Print dialog box.
NOTE: To prevent jams, manually feed the
Print on transparencies
For the best results, HP recommends you use HP transparency products with the HP All-
To print on transparencies
1.Load the transparency into the input tray.
2.On the File menu in your software application, click Print.
3.Make sure the product is the selected printer.
4.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.
5.Click the Features tab.
6.In the Basic Options area, from the Paper Type
TIP: If you want to make notations on the back of the transparencies and erase them later without scratching the original, click the Advanced tab, and select the Mirror Image check box.
7.In the Resizing Options area, from the Size
8.Click OK, and then click Print or OK in the Print dialog box.
NOTE: The product automatically waits for transparencies to dry before releasing them. Ink dries slower on film than on plain paper. Make sure you allow enough time for the ink to dry before handling the transparency.
Print a group of addresses on labels or envelopes
With the HP
88 Print from your computer