Use the job-build feature
Use the Job Build option to divide a complex job into smaller segments. This is useful when you are scanning an original document that has more pages than the document feeder can hold or when you want to combine pages that have different sizes into one job. You can use either the glass or the document feeder to scan the original documents.
NOTE: The Job Build option is available for the Copy,
1.Place the first segment of the job into the document feeder or onto the scanner glass.
NOTE: If you are scanning on the glass, each page is a separate segment.
2.Touch Copy,
3.Touch Job Build and then select Job Build on. Touch OK.
4.Press Start to scan the first segment.
5.The device prompts you to load the next segment.
●If you want to apply different options to this segment or modify settings that apply to the whole job, touch Options.
●If you have more segments to scan, touch Scan.
●If you have finished scanning all the segments, touch Finish.
●If you need to start over, touch Cancel Job.
6.When you select Finish, your job will begin processing.
ENWW | Copy 33 |
