Shift images on the page

You can adjust the placement of the image on the page toward any edge.

1.On the File menu, click Print.

2.Open the Finishing menu.

3.On the Image Shift tab, select the appropriate settings.

You can adjust the front and back sides independently by specifying measurements for Front Side Shift and Back Side Shift.

You can adjust the front and back sides by the same amount, but in opposite directions. This is useful for creating a wider margin along the binding edge. Select Front Side Shift, specify the settings, and then select Mirror Front Side.

Select Reduce to Fit to shrink the image to accommodate increased margins.

Set the stapling options

If the HP Multifunction Finisher is installed, you can staple documents.

1.On the File menu, click Print.

2.Open the Finishing menu, and select Output Bin 5 for the Output Destination.

3.On the Finishing tab, next to Finishing Options or Staple, select the stapling option that you want to use.

Set the color options

Use the Color/Quality Options menu to control how colors are interpreted and printed from software programs.

1.On the File menu, click Print.

2.Open the Color/Quality Options menu.

3.Select the color options that you want to use.

Use the Services menu

If the device is connected to a network, use the Services menu to obtain device and supply-status information.

1.On the File menu, click Print.

2.Open the Services menu.

3.Select a maintenance task from the drop-down list, and then click Launch. The embedded Web server opens to the page that provides the information for the task that you selected.

66 Chapter 2 Use the device

ENWW

Page 74
Image 74
HP CM8060 Color with Edgeline Technology manual Shift images on, Use the Services menu