Printing on cards and smaller-sized media
NOTE: If you are printing on thick paper (such as cardstock), you can use the rear manual feed slot. See Printing with the front or rear manual feed slot on page 50.
If you wish to print to the edge of the cards, see Printing borderless on page 44.
1.Raise the output tray and remove any media from the input tray.
2.Insert up to 60 cards, or a stack of media that does not exceed the height of the paper width guide,
3.Open the small media guide by moving it 90˚ clockwise from the start position to the end position.
4.Press the button on top of the paper width guide and slide the guide to the right until it stops at the edge of the cards.
5.Press the input tray lock and retract the tray until the small media guide stops at the edge of the cards. As you retract the tray, the small media guide extends until it touches the edge of the media.
56 Chapter 4 Printing and loading media | ENWW |
