HP K7100 manual Inserting the print cartridges, To install or replace a print cartridge

Inserting the print cartridges

Use only the replacement cartridges that have the same cartridge number as the print cartridge that you are replacing. See Supported print cartridges on page 19

To install or replace a print cartridge

1.Turn on the printer, open the top cover, and lift the print latch.

CAUTION: The print cartridge carriage may be moving into its correct position. Be sure the print cartridge carriage is parked at the right-hand side of the printer before removing or installing print cartridges.

2.If you are replacing a print cartridge, grasp the installed print cartridge and slide it out of its cradle. To ensure you are placing the new print cartridge into the correct position, verify the symbols on the latch match the symbols on the new cartridge.

3.If you are installing a new print cartridge, remove the print cartridge from its package, and then remove the clear nozzle protective tape by pulling on the pink pull-tab.

CAUTION: To prevent clogs, ink failure, and bad electrical connections, do not touch the print cartridge ink nozzles or copper contacts, and do not remove the copper contacts.

20 Chapter 3 Using print cartridges and accessories ENWW