Display Cable
The main display cable connector is located behind the system board. You must remove the system board to remove the display cable.
Figure 6-66 Display cable location
To remove the display cable:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33).
2.Remove the center access panel (see Hinge Cover Panel on page 34).
3.Remove the memory access panel (see Memory Access Panel on page 36).
4.Remove the drive access panel (see Drive Access Panel on page 38).
5.Remove the stand (see Stand on page 61).
6.Remove the optical drive (see Optical Drive on page 40).
7.Remove the heat sink cover (see Heat Sink Cover on page 52).
8.Remove the heat sink (see Heat Sink (Thermal Module) on page 54.
9.Remove the top panel (see Top Panel on page 58).
10.Remove the rear cover (see Rear Cover on page 62).
11.Remove the system board shield (see System Board Shield on page 69).
12.Remove the system board (see System Board on page 77).
82 Chapter 6 Removal and Replacement Procedures
