HP Pro 4300 manual Power Switch Assembly

Models: Pro 4300

1 162
Download 162 pages 51.63 Kb
Page 96
Image 96

Power Switch Assembly

The power switch assembly is located on the bottom corner of the inside of the front bezel. You must remove the front bezel from the computer to remove the power switch assembly from the bezel.

Figure 6-72Power switch assembly location

To remove the power switch assembly:

1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33).

2.Remove the center access panel (see Hinge Cover Panel on page 34).

3.Remove the memory access panel (see Memory Access Panel on page 36).

4.Remove the drive access panel (see Drive Access Panel on page 38).

5.Remove the stand (see Stand on page 61).

6.Remove the optical drive (see Optical Drive on page 40).

7.Remove the top panel (see Top Panel on page 58).

8.Remove the rear cover (see Rear Cover on page 62).

9.Remove the front bezel (see Front Bezel on page 84.

10.Pull the two tabs (1) toward the bottom of the bezel, and then rotate the assembly up and off the bezel (2).

11.Pull the light pipe out of its slot (3).

Power Switch Assembly 89

Page 96
Image 96
HP Pro 4300 manual Power Switch Assembly