HP Pro 4300 manual Speakers

Speakers

The speakers are located at the bottom of the computer. Two separate speakers are each secured by two Torx screws and have separate cables and system board connectors.

Figure 6-57Speaker location

To remove the speakers:

1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33).

2.Remove the center access panel (see Hinge Cover Panel on page 34).

3.Remove the memory access panel (see Memory Access Panel on page 36).

4.Remove the drive access panel (see Drive Access Panel on page 38).

5.Remove the stand (see Stand on page 61).

6.Remove the optical drive (see Optical Drive on page 40).

7.Remove the heat sink cover (see Heat Sink Cover on page 52).

8.Remove the top panel (see Top Panel on page 58).

9.Remove the rear cover (see Rear Cover on page 62).

10.Remove the system board shield (see System Board Shield on page 69).

11.Remove two Torx screws that secure each speaker to the computer.

12.Disconnect the speaker cables from the system board connectors . The left speaker connects to the white connector labeled LFT_SPKR. The right speaker connects to the black connector labeled RT_SPKR.

Speakers 73