HP Pro 4300 manual Top Panel

Top Panel

The top panel is secured with two Torx screws. Removing it allows access to the webcam and allows you to remove the main rear cover.

Figure 6-36Top panel location

To remove the top panel:

1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 33).

2.Remove the center access panel (see Hinge Cover Panel on page 34).

3.Remove the memory access panel (see Memory Access Panel on page 36).

4.Remove the drive access panel (see Drive Access Panel on page 38).

5.On the top of the computer, remove the two black Torx screws (1) that secure the top panel to the computer.

6.Rotate the top of the panel outward (2), and then lift the panel off the computer. Figure 6-37Removing the top panel

To replace the top panel, reverse the removal procedures.

58 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis