HP Pro 8000 C9297A#B1H manual Maintain the printheads

6.Obtain a clean, dry, soft, and lint-free cleaning material. Suitable materials include paper coffee filters and eyeglass lens cleaning paper.

CAUTION: Do not use water.

7.Wipe the electrical contacts on the printhead, but do not touch the nozzles.

CAUTION: The electrical contacts are small copper-color squares, grouped on one face of the printhead.

The nozzles are on a different face of the printhead. Ink will be visible on the nozzles.

Touching the nozzles can cause permanent nozzle damage. Also, ink can permanently mark clothing.

8.After cleaning, place the printhead on a sheet of paper or paper towel. Make sure the nozzles are facing up and are not in contact with the paper.

9.Clean the electrical contacts in the printhead slot inside the device with a clean, dry, soft, and lint-free cloth.

10.Insert the printhead into its color-coded slot (the label on the printhead must match the label on the printhead latch). Press down firmly on the printhead to ensure proper contact.

11.Pull the printhead latch all the way forward, and then press down to ensure that the latch is properly engaged. You might have to apply some pressure to engage the latch.

Maintain the printheads 63