Chapter 3

NOTE: If you are using the duplexer to print on both sides of the paper, the minimum top and bottom margins must match or exceed 12 mm (0.47 inch).

NOTE: For Mac OS X, the minimum bottom margin for all the media (except envelope, Hagaki, and Ofuku Hagaki) is 12 mm (0.47 inch).

Load media

This section provides instructions for loading media into the device.

NOTE: Tray 2 is sold as an accessory. For ordering information, see Accessories.

To load Tray 1 (main tray)

1.Lift the output tray.

2.Slide the media guides out to the widest setting.

3.Insert the media print-side down in the center of the tray, make sure the media does not exceed the line marking in the tray. Slide the media guides towards the center until they touch the left and right sides of the media, and then gently push the paper stack to the back of the tray.

NOTE: Do not load paper while the device is printing.

22 Use the device

Page 26
Image 26
HP Pro 8000 C9297A#B1H manual Load media, To load Tray 1 main tray