Calibration of the costtracker
First read the current amount of ink either from the printer’s panel if this is supported by the printer.
If not weigh the ink tanks.
Please output the test file 10_Grafik_6_farben.tif 10 times in the print mode you want to calibrate on the medium. The coverage is 20%.
Then measure the amount of ink used either by reading the panel again or weighing the tanks.
Calculate the used ink amount. 1 ml is about 1 g.
Determine the value you have to insert in the costtracker using following formula:
Used ink
coverage x number of prints
87
