Edit size correction
During color calibration, correction factors for width and length are calculated. These factors can be changed manually, for example in the rare case when the automatic size recognition fails to work.
In this case, proceed as follows:
Set the value for the width and height correction to 100.
Print the file and calculate the difference between the sizes of original and copy.
Use the rule of three to calculate the correction factor.
Example: the original has a height of 120mm; the copy has a height of 126mm.
The correction factor is calculated as follows: 120 / 1.26 = 95.2381
Values between 90 and 110 are applicable.
Delete Calibration
The saved calibration for the selected print mode will be deleted.
Target Selection
With AL L , all check boxes will be activated.
With NO N E , you can deactivate all check boxes with a single click.
With INVERT SELECTION , all active check boxes will be deactivated and vice versa.
26
