Special Considerations
Upgrading to Instant Capacity versions B.06.x or B.07.x Software
Upgrading to Instant Capacity versions B.06.x or B.07.x Software
The first time a version of the new B9073BA Instant Capacity software (B.06.00 or later) is loaded onto a system where the old B9073AA software (version B.03.x through B.05.x) has been in use, the new software requires the system to go through an upgrade process.
This process involves transferring Instant Capacity inventory information from HP to the system through the application of an upgrade codeword. This allows the system (using the new B9073BA software) to keep track of the number of unlicensed components present.
Prior to December 2003, the Instant Capacity software product
(B9073AA) was loaded from Support Plus media and was not present on the 11i v1 and 11i v2 Operating Environment (OE) media. In December 2003, an updated version of the Instant Capacity software product (B9073BA) was placed on the 11i v1 and 11i v2 OE media.
The Instant Capacity versions B.06.x or B.07.x software (B9073BA) is automatically installed when the
After the Instant Capacity software is updated in one partition from an older B9073AA version (B.03.x through B.05.x) to the newer B9073BA version (B.06.00 or later), the Instant Capacity software in all of the system’s other partitions needs to be updated before the new software is completely operational. Until that time, the new software does not have visibility of the status of partitions running the old software. As a result, it is likely that exception
After the installation of new Instant Capacity B9073BA software on the first partition, perform the following steps:
Step 1. Execute the following command and record the output:
/usr/sbin/icod_stat
You can copy and paste the output of the icod_stat
122 | Appendix A |