Special Considerations
Measurement Software on Instant Capacity Systems
Measurement Software on Instant Capacity
Systems
Instant Capacity systems inherently have fewer active processors than the total number of processors in the system. This fundamental difference between the number of active processors and the total number of processors can cause some processor measurement products and utilities to report incorrect information. Additionally, when a processor is dynamically activated, some software products must recognize the change in the number of active processors in order to report correct processor related information.
OpenView Measurement Products
OpenView measurement products, such as MeasureWare and GlancePlus, must be version C.02.60 or later to provide correct processor measurements. Earlier versions of the OpenView measurement products may not work correctly on Instant Capacity systems.
On hp Integrity On hp Integrity Superdome systems, HP recommends updating to the
Superdome GlancePlus Pak version C.03.20 or later.
Systems
Other Measurement Software
Please check with your measurement software vendor to ensure their software works properly on Instant Capacity systems and update the measurement software versions as needed.
Appendix A | 151 |
