NOTE

Getting Started

Instant Capacity Software Validation

Instant Capacity Software Validation

The Instant Capacity software versions B.07.x (HP product B9073BA) are installed by HP manufacturing on instantly ignited systems. The Instant Capacity software can also be installed by an HP service representative on existing (supported) HP enterprise servers as an add-on.

The Instant Capacity software is automatically installed when the HP-UX 11i v2 or 11i v1 Operating Environment (OE) is installed.

To verify the Instant Capacity software is installed on your system, execute the following command:

/usr/sbin/swlist B9073BA

You should see output similar to:

B9073BA B.11.23.07.00 HP-UX iCOD (Instant Capacity)

To ensure the Instant Capacity software installation has not been corrupted, execute the following command:

/usr/sbin/swverify B9073BA

You should see Verification succeeded. in the output of the swverify command.

Chapter 2

39