HP UX 11i v2 manual For Instant Capacity Versions B.07.x on HP-UX 11i, HP-UX 11i v1 Requirements

For Instant Capacity Versions B.07.x on HP-UX 11i v1

Getting Started

Instant Capacity Requirements

HP-UX 11i v1 Requirements

The following software is required for Instant Capacity versions B.07.x on HP-UX 11i v1:

❏HP-UX 11i v1 September 2005 update, or later

❏iCOD software bundle B9073BA (versions B.07.x) — installed automatically when the HP-UX 11i v1 Operating Environment (OE) is installed

❏The kernel configuration must include the diag2 module

❏WBEM B8465BA bundle (version A.02.00 or higher)

❏nPartition provider NPar bundle (version B.11.11.01.03 or higher, available from the OE)

❏If you have a virtual partitioned environment, the Virtual Partitions software (bundle T1335AC) must be version A.02.03 or greater

Required Patches for HP-UX 11i v1

The following patches (or superseded patches) are required for Instant Capacity versions B.07.x on HP-UX 11i v1:

•PHKL_22987: S700_800 11.11 pstat() patch - Only if your system runs MeasureWare software

•PHKL_23154: S700_800 11.11 dflush() patch

•PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang fix

•PHKL_26232: S700_800 11.11 Psets Enablement patch, FSS iCOD patch

•PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs, serial number

•PHCO_24396: S700_800 11.11 /etc/default/tz patch

•PHCO_24477: S700_800 11.11 sar (1M) patch

•PHCO_29832: S700_800 11.11 reboot(1M) patch

•PHCO_29833: S700_800 11.11 killall(1M) patch

IMPORTANT	For the most recent required patches, see the Instant Capacity
	Installation page on the HP web site
	http://www.hp.com/go/softwaredepot (search for “B9073BA”).

Chapter 2 25