Instant Capacity Manpages

icod_modify (1M) Manpage

UPGRADES

The icod_modify command fails if the system is in a state where a software upgrade is incomplete (the software on the system has been upgraded from version B.05.00 or earlier, but an upgrade codeword issued by the HP iCOD portal (http://www.hp.com/go/icod/portal) has not been applied to the system). The only option that can be used when the complex is in this state is the -Coption, which accepts the upgrade codeword.

EXTERNAL INFLUENCES

Environment Variables

•LANG determines the locale to use for the locale categories when both LC_ALL and the corresponding environment variable (beginning with LC_) do not specify a locale. If LANG is not set or is set to the empty string, a default of “C” is used (see lang (5)).

•LC_CTYPE determines the interpretation of single- and multi-byte characters.

•LC_TIME determines the date and time strings output.

•LC_MESSAGES determines the language in which messages are displayed.

If any internationalization variable contains an invalid setting, icod_modify behaves as if all internationalization variables are set to “C” (see environ (5)).

International Code Set Support

Single- and multi-byte character code sets are supported. However, input to the command must be entered using ASCII characters only.

RETURN VALUE

icod_modify exits with one of these values:

0

Command succeeded.

>0

Command failed; error message sent to STDERR.

170

Appendix C