Setup
WebQoS Configuration Files
qos.conf
qos.conf is the WebQoS global configuration file. In UNIX, this file is located in the /etc/opt/webqos directory. In Windows, this file is located in
On a UNIX system, configure qos.conf before running the WebQoS setup script. If you update qos.conf after running the setup script, individual components (for example, the web server, SCA, SCI, and/or SCO) must be restarted for any changes to take effect (see “Restarting WebQoS Components (UNIX)” on page 30).
On a Windows system, if you update qos.conf, individual components (for example, the web server, SCA, SCI, and/or SCO) must be restarted for any changes to take effect (see “Restarting WebQoS Components (Windows)” on page 30).
The following parameters can be set:
SCA and Web Server Parameter
The following parameter affects the SCA and web server. If you change this parameter, you must restart the SCA and web server.
•MeasurementInterval (seconds)
Default: 30
Range: 5 - 43200 (12 hours)
How often, in seconds, WebQoS collects performance measurements. The MeasurementInterval must be an even multiple of the
MonitorInterval.
If Site Statistics Logging is enabled from the management console, this parameter also specifies the interval at which the SCA generates site statistics.
Web Server Parameters
The following parameters affect the web server. If you change any of these parameters, you must restart the web server.
•EXCLUDE_FILE_EXTNS
Default: gif jpeg jpg
Range: Up to 10 extensions can be specified. Each extension can be up to 10 characters.
Chapter 2 | 23 |
