Setup
WebQoS Configuration Files
more than two days old are deleted.
SCO Parameters
The following parameters affect the SCO only. If you change any of these parameters, you must restart the SCO.
•HistoryEventDays (days)
Default: 7
Range: 1 - 365
How many days of history events to save. At midnight, history events older than the specified age are deleted.
•SCOLogExternMeas
Default: 0 (disabled)
Range: 0 (disabled) or 1 (enabled)
Enable or disable external measurement logging.
The SCOLogInterval parameter determines how often the SCO writes external measurement data to a log file.
In UNIX, the external measurement log files are located in the /var/opt/webqos/stats directory. In Windows, these files are located in the
•SCOLogInterval (minutes)
Default: 5
Range: 1 - 1440 (24 hours)
How often, in minutes, WebQoS logs aggregate service statistics to a service statistics log file. Service statistics logging must be enabled using the management console before aggregate service statistics are logged. See “Service Statistics” on page 50 for a list of the logged aggregate statistics.
In UNIX, the service statistics log file is located in the /var/opt/webqos/stats directory. In Windows, these files are located in the
•ServiceSLOInterval (seconds)
Default: 30
Range: 5 - 43200 (12 hours)
How often, in seconds, the SCO monitors the service level SLOs.
Chapter 2 | 27 |
