HP WebQoS Software manual Default HTTP/1.1

Setup

WebQoS Configuration Files

Extensions of file types that are typically embedded in a requested page and should not be considered new sessions. Any policies or rules should not be applied to them. For example, gif, jpeg, and jpg are graphic files that are typically embedded in a requested page. A separate request is generated for each of these files but these requests should not be considered new sessions. Also, any policies and/or rules configured are applied only to the requested page, not to these embedded files.

•HTTPVersion

Default: HTTP/1.1

•KeepDeferringAfterMaxDeferTime

Default: TRUE

Range: TRUE or FALSE

Based on the calculated defer time and the maximum defer time configured in the Defer Corrective Actions screen (default maximum defer time is 120 seconds). If the calculated defer time is greater than the maximum defer time and this parameter is set to TRUE, new sessions are deferred. If the parameter is set to FALSE, new sessions are re-evaluated (in accordance with the configured corrective actions).

•MonitorCPUWeight (%)

Default: 20

Range: 1 - 100

Percentage of the current CPU utilization (pstat is used to determine current CPU utilization) used to calculate the weighted CPU utilization. The weighted CPU utilization is based on the current and previous (last measured) CPU utilization:

weighted CPU% = (MonitorCPUWeight% * current CPU) + [(100 - MonitorCPUWeight)% * previous CPU]

For example, if you set the MonitorCPUWeight to 20, the current CPU utilization is 60, and the previous CPU utilization is 50, the weighted CPU utilization is (20% * 60) + [(100 - 20)% * 50] or 52%.

If you want to monitor the current CPU utilization only, set this parameter to 100.

The MonitorInterval parameter determines how often the weighted CPU utilization is calculated (default is every 5 seconds).

24 Chapter 2